
Wardrobe dismantling service in Al Khatim
When moving from Al Khatim in the Medina region, large wardrobes that won't fit through doors need dismantling and reassembly.
What we take care of in Al Khatim
When you book wardrobe dismantling in Al Khatim, this is what we take care of, and we settle with you what your job needs before we start.

- Unhanging hinged doors and keeping hinges and screws together
- Wrapping mirrors and glass panels in rigid protective layers
- Removing shelves and top boxes with each panel marked
- Reassembling the wardrobe level, with doors aligned and rehung
How the work runs in Al Khatim
Tell us about the wardrobes
Tell us the door type, how many wardrobes there are, where they are going and which floor, and we arrange the visit with you.
We dismantle and secure the parts
Doors come off first, then shelves and panels. Screws, hinges and runners go into labelled bags so nothing goes missing.
We wrap and protect
Mirrors are wrapped in foam sheets with rigid cardboard edges, and wooden panels are covered in layers that protect against scratches and guard the corners from knocks.
We reassemble and adjust
The wardrobe goes back together level in the new place, doors are rehung on their hinges or slid back onto their rails and adjusted until they move smoothly, and a tall wardrobe is fixed to the wall.
What we pay attention to in wardrobe dismantling
Our work for this service









What our customers wrote about us
مشا الله شغلهم سريع ومرتب انصح بالتعامل معهم
Google Maps review · October 2026ما شاء الله الشباب شغلهم مره ممتاز دقه في العمل و محافظه علي الأغراض أنصح بالتعامل معهم الله يعطيهم العافيه
Google Maps review · August 2026شركه ممتازه جدا بصراحه الله يبارك في الشباب ما قصروا في شيء
Google Maps review · September 2026
Our service in Al Khatim
Borooj Al Dammam handles the whole job with care, from taking apart to rebuilding at your new home.
In mixed residential areas, one home may have a wide entrance but a tight stairwell. A large wardrobe is taken apart before going in: doors come off, shelves are removed and the frame is separated from everything. Each part is wrapped in protective padding and covers for the long journey from Al Khatim anywhere in the Kingdom. Light pieces are carried easily, heavy ones lifted gently. On arrival the wardrobe is rebuilt in reverse order, looking new.
Al Khatim is a district in the Medina region, far from Dammam, so moves from here are long road trips across the Kingdom.
Dismantling makes moves possible when doorways are tight, and full protection keeps the wardrobe looking and working right over a long distance.
Al Khatim lies near Medina in Medina, and we also cover Al Hadiqah, Al Jummah and Ash Shuraybat.
Nearby areas for Wardrobe dismantling
Questions about wardrobe dismantling in Al Khatim
What if the wardrobe is fixed to the wall?
We carefully remove the fixtures and dismantle it in parts. When you call or message on WhatsApp, tell us if the wardrobe is fixed to the wall, and we plan the correct dismantling approach.
Are all wardrobe parts returned to the new home?
Yes. Every part is moved and reassembled. We record each part when dismantling, and on arrival rebuild them all so the wardrobe is complete and working.
Do your services reach Al Khatim?
Yes. Our services reach Al Khatim and the rest of Medina; we work in every region of the Kingdom from our base in Dammam.
What should I measure before I call?
Measure the wardrobe width, height and depth, and measure the door it must pass through at the new place and the ceiling height. Tell us whether the doors are sliding or hinged and whether there are mirrors. This helps us prepare the right materials.
Is the top box always removed?
The top box comes off when the wardrobe is too tall to pass under the corridor ceiling or through a door. If clearances are fine we leave it on. Tell us the wardrobe height and the tightest point along the route, and we decide together.
How are wooden panels protected from scratches during the move?
Panels are wrapped in blankets and foam, and the corners are guarded with cardboard edges held by tape. Film alone does not stop scratching when two panels rub together, so the panels are separated face to face with a layer between them.
Other services in Al Khatim




