
Wardrobe dismantling service in Radwa Halit
Moving a wardrobe from your home in Radwa Halit to another city in the Riyadh Region requires dismantling to protect the doors and mirrors.
The service in Radwa Halit, in detail
These are the main tasks the service covers in Radwa Halit and the rest of Riyadh Region.

- Wrapping mirrors and glass panels in rigid protective layers
- Removing shelves and top boxes with each panel marked
- Removing sliding doors and taking out rails and runners
- Fixing a tall wardrobe to the wall after reassembly
- Reassembling the wardrobe level, with doors aligned and rehung
The steps of the service in Radwa Halit
Tell us about the wardrobes
Tell us the door type, how many wardrobes there are, where they are going and which floor, and we arrange the visit with you.
We dismantle and secure the parts
Doors come off first, then shelves and panels. Screws, hinges and runners go into labelled bags so nothing goes missing.
We wrap and protect
Mirrors are wrapped in foam sheets with rigid cardboard edges, and wooden panels are covered in layers that protect against scratches and guard the corners from knocks.
We reassemble and adjust
The wardrobe goes back together level in the new place, doors are rehung on their hinges or slid back onto their rails and adjusted until they move smoothly, and a tall wardrobe is fixed to the wall.
Why wardrobe dismantling is its own craft
Our work for this service









What our customers say
متعاونين جدا واسعارهم معقولة
Google Maps review · September 2026ما شاء الله الشباب شغلهم مره ممتاز دقه في العمل و محافظه علي الأغراض أنصح بالتعامل معهم الله يعطيهم العافيه
Google Maps review · August 2026افضل شركه نقل اثاث
Google Maps review · July 2026
Our service in Radwa Halit
Borooj Al Dammam completely dismantles and reassembles it in your new home after a long journey from Dammam.
In a small hamlet where houses are spread out and passages may be irregular, dismantling begins with understanding the home's layout. The wardrobe is systematically dismantled: doors first, then interior fittings, then mirrors, shelves and frame. Each part is noted and wrapped with protective padding. The truck carries parts firmly secured because the route is very long from Dammam to the final destination. Reassembly is done with full care.
Radwa Halit is a hamlet in the Riyadh Region, far from Dammam, so moving from here involves a long road trip across the Kingdom.
Over an extremely long distance, sturdy straps and extra padding are used at the corners of wardrobe parts to prevent any sliding.
We serve Radwa Halit in Riyadh Region, and we also offer wardrobe dismantling in Shubayrimah, Zalmawi and الرمحية.
Nearby areas for Wardrobe dismantling
Questions about wardrobe dismantling in Radwa Halit
What happens to the wardrobe during the long journey?
Each part is secured and protected inside the truck. Doors and mirrors are wrapped in thick padding, shelves are stacked gently with separating materials, and the frame is held with straps to prevent movement.
Does reassembling the wardrobe require special skill?
The Borooj Al Dammam team reassembles the wardrobe as it was. On arrival, inform the crew of any design features or floor conditions, and reassembly is done with full precision.
How do I book wardrobe dismantling in Radwa Halit?
Call us or message us on WhatsApp with your location in Radwa Halit and what you need, and we will arrange the details with you.
What should I measure before I call?
Measure the wardrobe width, height and depth, and measure the door it must pass through at the new place and the ceiling height. Tell us whether the doors are sliding or hinged and whether there are mirrors. This helps us prepare the right materials.
Is the top box always removed?
The top box comes off when the wardrobe is too tall to pass under the corridor ceiling or through a door. If clearances are fine we leave it on. Tell us the wardrobe height and the tightest point along the route, and we decide together.
How are wooden panels protected from scratches during the move?
Panels are wrapped in blankets and foam, and the corners are guarded with cardboard edges held by tape. Film alone does not stop scratching when two panels rub together, so the panels are separated face to face with a layer between them.
Other services in Radwa Halit




