
Wardrobe dismantling service in second industrial, Ra's Tannurah
If you are moving an office or home from the second industrial district with a large wardrobe, dismantling is essential: the wardrobe will not pass through any doorway whole, and its doors, mirror and shelves risk damage.
What wardrobe dismantling covers in second industrial, Ra's Tannurah
This is what wardrobe dismantling involves, arranged with you around your location in second industrial, Ra's Tannurah.

- Unhanging hinged doors and keeping hinges and screws together
- Removing shelves and top boxes with each panel marked
- Removing sliding doors and taking out rails and runners
- Wrapping mirrors and glass panels in rigid protective layers
- Fixing a tall wardrobe to the wall after reassembly
From dismantling to reassembly, step by step
Tell us about the wardrobes
Tell us the door type, how many wardrobes there are, where they are going and which floor, and we arrange the visit with you.
We dismantle and secure the parts
Doors come off first, then shelves and panels. Screws, hinges and runners go into labelled bags so nothing goes missing.
We wrap and protect
Mirrors are wrapped in foam sheets with rigid cardboard edges, and wooden panels are covered in layers that protect against scratches and guard the corners from knocks.
We reassemble and adjust
The wardrobe goes back together level in the new place, doors are rehung on their hinges or slid back onto their rails and adjusted until they move smoothly, and a tall wardrobe is fixed to the wall.
Why wardrobe dismantling is its own craft
Our work for this service









What our customers say
شركه ممتازه جدا بصراحه الله يبارك في الشباب ما قصروا في شيء
Google Maps review · September 2026افضل شركه نقل اثاث
Google Maps review · July 2026متعاونين جدا واسعارهم معقولة
Google Maps review · September 2026
Our service in second industrial, Ra's Tannurah
Borooj Al Dammam expertly dismantles it, moves it safely and reassembles it at your new location.
The second industrial district has commercial and residential buildings mixed, with doors and hallways of varying sizes. A wardrobe in an office may need different dismantling than one in a home. We inspect the location first: door width, hallway and stairway dimensions. Then we carefully remove doors, mirrors and shelves, bag the fasteners with numbers, and carry the frame through the space. At the new location, we rebuild step by step, using numbers and marks.
The second industrial district is in the Ra's Tannurah area of the Eastern Province, close to Dammam, so moves from the district are short local trips.
A wardrobe in a commercial area may be heavier or have an industrial design, but dismantling remains the same: careful and methodical.
If you are moving from or to second industrial, Ra's Tannurah, our service also covers An Naim, First Industrial and Al Fayha and the rest of Eastern.
Nearby areas for Wardrobe dismantling
Questions before you book in second industrial, Ra's Tannurah
Can you dismantle a wardrobe in an office and move it from the second industrial district?
Yes. Tell us what is in the wardrobe, where it is and where you are moving it to, and we will arrange the dismantling and move. If it is in an office or workshop, we work around times that suit you.
Are fasteners and joints safe during a short move?
Completely. Every screw and joint goes into a numbered bag and stays with the wardrobe parts in the truck. The short distance means everything arrives as is.
Do your services reach second industrial, Ra's Tannurah?
Yes. Our services reach second industrial, Ra's Tannurah and the rest of Eastern; we work in every region of the Kingdom from our base in Dammam.
Do I need to empty the wardrobe before dismantling?
Yes, the wardrobe must be fully empty before we start. Clothes, shoes and anything inside go into bags or cartons, so nothing falls when the panels come off and so we can handle the frame safely.
What should I measure before I call?
Measure the wardrobe width, height and depth, and measure the door it must pass through at the new place and the ceiling height. Tell us whether the doors are sliding or hinged and whether there are mirrors. This helps us prepare the right materials.
How are wooden panels protected from scratches during the move?
Panels are wrapped in blankets and foam, and the corners are guarded with cardboard edges held by tape. Film alone does not stop scratching when two panels rub together, so the panels are separated face to face with a layer between them.
Other services in second industrial, Ra's Tannurah




