Borooj Al DammamFurniture Moving
عربي +966 57 328 4486
Living room with a sofa, armchair and wardrobe wrapped in film, cartons, and the open door onto a moving truck in the street

Split AC removal & install service in Hanin

Moving a split AC from Hanin begins with careful removal from the wall or window, then transport across a long journey to your new home.

Call now24 hours, 7 days
What it includes

The service in Hanin, in detail

When you book split AC removal & install in Hanin, this is what we take care of, and we settle with you what your job needs before we start.

Split AC removal & install
  • Switching off the unit and sealing the pipes before removal
  • Unbolting the outdoor unit and lowering it from its position
  • Running the pipes, cable and drain line
  • Lifting the indoor unit off its plate carefully
  • A test run to confirm the indoor and outdoor units are working together
How we work

The steps of the service in Hanin

  1. Seal the pipes, then remove

    Before any joint is opened the pipes are sealed to contain the refrigerant, then the indoor unit is lifted off its plate and the outdoor unit is unbolted and lowered safely from the wall or balcony.

  2. Confirm the new position

    You choose where the indoor and outdoor units will go, and we check that the wall will hold the bracket and that the pipe run is clear.

  3. Fix the bracket and run the pipes

    The indoor bracket is fixed to the wall first, the unit is mounted on it, and then the pipes, cable and drain line are run to the outdoor unit.

  4. Run the test

    The AC is switched on and we watch the cooling, the drain and the cable; if anything in the performance is off, we check the connections before leaving.

Why Borooj Al Dammam

Why book split AC removal & install with Borooj Al Dammam

The test run catches errorsA loose joint or a wiring error shows up in the test run before it becomes a costly fault.
Sealing pipes keeps the refrigerantOpening the pipes without sealing first lets the refrigerant escape and the unit needs recharging.
The bracket is the foundationA bracket fixed to a poor wall causes vibration and weakens the mounting over time.
The drain prevents leaksA drain pipe fitted without the right slope sends water back to the indoor unit and it leaks into the wall.
From our jobs

Our work for this service

The company’s white truck with a Borooj Al Dammam furniture moving sticker
A sitting room with sofas, chairs and tables wrapped in film, ready to move
A large hall with a glossy floor and big pieces of furniture wrapped in white
A living room after installation with a corner sofa, a table, a rug and side tables
Round side tables with metal bases set out in a hall
A seating corner with a sofa, an armchair, a glass table and side tables on a rug
Customer reviews

What our customers say

About the area

Our service in Hanin

Borooj Al Dammam handles dismantling, installation and testing, protecting the pipework and refrigerant throughout.

In a district like Hanin in the Makkah region where homes may have multiple floors, the crew removes the unit and carefully disconnects the internal and external components. The journey from Hanin to Dammam is very long, so the AC is packed to protect pipework from bending, pressure and vibration. At the new location the unit is installed and all connections and cooling are tested.

Hanin is a district in the Makkah Region near Al Juranah, very far from Dammam, so moves from here are very long journeys across the Kingdom.

Over very long distances, the split AC needs extra padding around pipework and strong securing inside the vehicle.

We serve Hanin in Makkah Region, and we also offer split AC removal & install in AlMuharraq, Wadi Jadean and Alaumaylih.

Split AC removal & install: full service details

Nearby areas

Nearby areas for Split AC removal & install

FAQ

Common questions about the service in Hanin

Can you remove an AC from a building in Hanin?

Yes. We remove it carefully from homes or buildings, disconnecting it safely. Tell us which floor and location, and we arrange the job with you.

Does a very long journey affect the AC's performance?

Not if it is dismantled carefully, packed properly and installed correctly. We protect the pipework and refrigerant throughout the journey from Hanin, so the unit arrives ready to work.

How do I book split AC removal & install in Hanin?

Call us or message us on WhatsApp with your location in Hanin and what you need, and we will arrange the details with you.

Do the old pipes need replacing when we reinstall?

The pipes are reused if they are in good condition and long enough for the new distance between the units. If they are short or damaged, this is spotted during removal. Call us or message on WhatsApp with the distance between the positions and we will discuss it with you.

What should I prepare before the team arrives to install?

Clear the wall where the indoor unit will go and move furniture away from it, decide in advance where the outdoor unit will be placed, and make sure both positions are accessible. The clearer your information, the smoother the installation.

Should I switch the AC off before the team arrives?

Yes, switch the AC off well before we arrive so the unit stops cooling and the pressure in the pipes settles. Tell us when you contact us and we will guide you.

Other services

Other services in Hanin

All services
A tidy living room after the move with a sofa, cushions, a table, a rug and a large window onto a residential street

Ready to book in Hanin?

Tell us what you need in Hanin, and we will settle with you what the job requires before we start.

24 hours, 7 daysCall now
Call now