Borooj Al DammamFurniture Moving
عربي +966 57 328 4486
Living room with a sofa, armchair and wardrobe wrapped in film, cartons, and the open door onto a moving truck in the street

Split AC removal & install

A split AC cannot simply be unplugged and carried: split AC removal & install follows specific steps, from the pipework through to a test run.

Call now24 hours, 7 days
What it includes

What the service includes

A split AC has an indoor unit and an outdoor unit linked by pipes, cables and a drain line, each fixed to a wall bracket. Removal means sealing the pipes before opening them so the refrigerant does not escape, lifting the indoor unit off its plate carefully, and unbolting the outdoor unit and bringing it down safely from its wall, balcony or roof position. Installation means fixing the bracket first, then running the pipes, cable and drain, and finally doing a test run to confirm that both units are working together.

Split AC removal & install
  • Switching off the unit and sealing the pipes before removal
  • Lifting the indoor unit off its plate carefully
  • Unbolting the outdoor unit and lowering it from its position
  • Fixing the bracket in the new place and fitting each unit in position
  • Running the pipes, cable and drain line
  • A test run to confirm the indoor and outdoor units are working together
How we work

How removal and installation work

  1. Seal the pipes, then remove

    Before any joint is opened the pipes are sealed to contain the refrigerant, then the indoor unit is lifted off its plate and the outdoor unit is unbolted and lowered safely from the wall or balcony.

  2. Confirm the new position

    You choose where the indoor and outdoor units will go, and we check that the wall will hold the bracket and that the pipe run is clear.

  3. Fix the bracket and run the pipes

    The indoor bracket is fixed to the wall first, the unit is mounted on it, and then the pipes, cable and drain line are run to the outdoor unit.

  4. Run the test

    The AC is switched on and we watch the cooling, the drain and the cable; if anything in the performance is off, we check the connections before leaving.

Why Borooj Al Dammam

Why correct removal matters

Sealing pipes keeps the refrigerantOpening the pipes without sealing first lets the refrigerant escape and the unit needs recharging.
The bracket is the foundationA bracket fixed to a poor wall causes vibration and weakens the mounting over time.
The drain prevents leaksA drain pipe fitted without the right slope sends water back to the indoor unit and it leaks into the wall.
The test run catches errorsA loose joint or a wiring error shows up in the test run before it becomes a costly fault.
From our jobs

Our work for this service

The company’s white truck with a Borooj Al Dammam furniture moving sticker
A sitting room with sofas, chairs and tables wrapped in film, ready to move
A large hall with a glossy floor and big pieces of furniture wrapped in white
A living room after installation with a corner sofa, a table, a rug and side tables
Round side tables with metal bases set out in a hall
A seating corner with a sofa, an armchair, a glass table and side tables on a rug
Customer reviews

What our customers say

FAQ

Questions about split AC removal & install

Should I switch the AC off before the team arrives?

Yes, switch the AC off well before we arrive so the unit stops cooling and the pressure in the pipes settles. Tell us when you contact us and we will guide you.

Where does the outdoor unit go in the new place?

The outdoor unit is usually fixed to an outside wall, a balcony edge or a roof; the position must be ventilated and able to bear the unit's weight. Tell us your options at the new place and we will advise on the best position.

Do the old pipes need replacing when we reinstall?

The pipes are reused if they are in good condition and long enough for the new distance between the units. If they are short or damaged, this is spotted during removal. Call us or message on WhatsApp with the distance between the positions and we will discuss it with you.

Can you install the unit in a room that has never had a split AC before?

Yes, we fix the bracket, cut the pipe and cable run, and lay the drain line even if the room has never had a split unit before. Tell us the room position, wall thickness and where you plan to put the outdoor unit.

What should I prepare before the team arrives to install?

Clear the wall where the indoor unit will go and move furniture away from it, decide in advance where the outdoor unit will be placed, and make sure both positions are accessible. The clearer your information, the smoother the installation.

Does removal change if the outdoor unit is on the roof?

The main steps stay the same: seal the pipes, then remove, but bringing the unit down from the roof needs safe access to it. Tell us the outdoor unit's position when you contact us so we can arrange the method with you.

AC dismantling, moving & installation

Related services

All services
Areas we serve

Areas for Split AC removal & install

Pick your area to see the service details for it.

Northern Borders (15)
Ḥa'il (234)
Makkah Region (378)
Tabuk (61)
Medina (149)
Al Jawf Region (86)
Al-Bahah (48)
Jazan (174)
Eastern (248)
Najran Region (63)
Riyadh Region (362)
'Asir (232)
Al-Qassim (118)
A tidy living room after the move with a sofa, cushions, a table, a rug and a large window onto a residential street

A split AC to move?

Call us or message us on WhatsApp, tell us where the units are now and where they are going, and we will arrange the removal and installation with you.

24 hours, 7 daysCall now
Call now