
Split AC removal & install service in Industrial Area, Yanbu` 2
The Industrial Area in the Medina region is very different from residential zones, and split ACs here may be in warehouses or offices of different sizes.
What we do for split AC removal & install in Industrial Area, Yanbu` 2
In Industrial Area, Yanbu` 2 our service covers the tasks below, and you can ask for only the ones you need.

- A test run to confirm the indoor and outdoor units are working together
- Switching off the unit and sealing the pipes before removal
- Lifting the indoor unit off its plate carefully
- Unbolting the outdoor unit and lowering it from its position
- Fixing the bracket in the new place and fitting each unit in position
How we carry out split AC removal & install in Industrial Area, Yanbu` 2
Seal the pipes, then remove
Before any joint is opened the pipes are sealed to contain the refrigerant, then the indoor unit is lifted off its plate and the outdoor unit is unbolted and lowered safely from the wall or balcony.
Confirm the new position
You choose where the indoor and outdoor units will go, and we check that the wall will hold the bracket and that the pipe run is clear.
Fix the bracket and run the pipes
The indoor bracket is fixed to the wall first, the unit is mounted on it, and then the pipes, cable and drain line are run to the outdoor unit.
Run the test
The AC is switched on and we watch the cooling, the drain and the cable; if anything in the performance is off, we check the connections before leaving.
What sets our way of working apart
Our work for this service









Our customers on Google Maps
مشا الله شغلهم سريع ومرتب انصح بالتعامل معهم
Google Maps review · October 2026افضل شركه نقل اثاث
Google Maps review · July 2026متعاونين جدا واسعارهم معقولة
Google Maps review · September 2026
Our service in Industrial Area, Yanbu` 2
Removing and installing a split unit here means dealing with multiple installations or industrial units that may be larger than domestic ones. Borooj Al Dammam disconnects these systems with precision and transports them on a very long journey from Dammam.
In the Industrial Area, units may be in high-ceiling warehouses or multi-storey offices. Removal requires understanding industrial systems and may need lifting gear if the outdoor unit sits high. Pipes and wiring may be longer and more complex than in homes. On a very long journey across the Kingdom, large units are firmly secured in the truck and surrounded with full protection.
The Industrial Area is a district in the Medina region near Yanbu`, far from Dammam, so moves from here require a long journey across the Kingdom.
Industrial systems may need special equipment for removal and handling, and on the long journey are packed with extra protection against movement.
Besides Industrial Area, Yanbu` 2, our services reach Radwa, Al Safa and Al Marwah and the rest of Medina.
Nearby areas for Split AC removal & install
Questions about split AC removal & install in Industrial Area, Yanbu` 2
Do you handle ACs in large warehouses?
Yes, we remove ACs from warehouses and offices in the Industrial Area regardless of unit size or installation height. Tell us about the space size, unit and height when you call or message WhatsApp.
Do you need special lifting gear to remove high-mounted ACs?
We may need lifting gear or platforms if the outdoor unit is at height. We assess this on arrival or agree on it beforehand when you call.
Do you offer split AC removal & install in Industrial Area, Yanbu` 2 and around it?
Yes. We offer split AC removal & install in Industrial Area, Yanbu` 2 and in nearby areas such as Radwa and Al Safa, as part of our cover of every region of the Kingdom.
Where does the outdoor unit go in the new place?
The outdoor unit is usually fixed to an outside wall, a balcony edge or a roof; the position must be ventilated and able to bear the unit's weight. Tell us your options at the new place and we will advise on the best position.
Can you install the unit in a room that has never had a split AC before?
Yes, we fix the bracket, cut the pipe and cable run, and lay the drain line even if the room has never had a split unit before. Tell us the room position, wall thickness and where you plan to put the outdoor unit.
Does removal change if the outdoor unit is on the roof?
The main steps stay the same: seal the pipes, then remove, but bringing the unit down from the roof needs safe access to it. Tell us the outdoor unit's position when you contact us so we can arrange the method with you.
Other services in Industrial Area, Yanbu` 2




