
Split AC removal & install service in second industrial, Ra's Tannurah
Industrial and commercial buildings in the Second Industrial district of Ra's Tannurah may house large or multiple split ACs.
The service in second industrial, Ra's Tannurah, in detail
Here is what the service includes when we carry it out in second industrial, Ra's Tannurah; we explain each step when you get in touch.

- Running the pipes, cable and drain line
- A test run to confirm the indoor and outdoor units are working together
- Switching off the unit and sealing the pipes before removal
- Fixing the bracket in the new place and fitting each unit in position
How the work runs in second industrial, Ra's Tannurah
Seal the pipes, then remove
Before any joint is opened the pipes are sealed to contain the refrigerant, then the indoor unit is lifted off its plate and the outdoor unit is unbolted and lowered safely from the wall or balcony.
Confirm the new position
You choose where the indoor and outdoor units will go, and we check that the wall will hold the bracket and that the pipe run is clear.
Fix the bracket and run the pipes
The indoor bracket is fixed to the wall first, the unit is mounted on it, and then the pipes, cable and drain line are run to the outdoor unit.
Run the test
The AC is switched on and we watch the cooling, the drain and the cable; if anything in the performance is off, we check the connections before leaving.
Why book split AC removal & install with Borooj Al Dammam
Our work for this service









What our customers wrote about us
شركه ممتازه جدا بصراحه الله يبارك في الشباب ما قصروا في شيء
Google Maps review · September 2026متعاونين جدا واسعارهم معقولة
Google Maps review · September 2026مشا الله شغلهم سريع ومرتب انصح بالتعامل معهم
Google Maps review · October 2026
Our service in second industrial, Ra's Tannurah
Moving these units from one office or warehouse to another requires careful removal and professional installation. Borooj Al Dammam handles the full process from draining the refrigerant through to testing the unit at its new location.
In an industrial zone, split ACs may be mounted on high walls, factory roofs or different production units. Outdoor units are larger and heavier, pipes may be longer or complex. Removal requires careful refrigerant draining, disconnecting pipes and electrical wiring, then lifting heavy units with specialist equipment or a hoist. Transport demands high protection for sensitive parts. Installation at the new site requires preparing surfaces and walls, connecting robust new piping, charging the refrigerant to specification and thorough testing. The Second Industrial district is close to Dammam, reducing travel time and weather exposure.
Second Industrial is a district in Ra's Tannurah in the Eastern Province, close to Dammam, making relocations from here short local journeys.
Large industrial ACs require specialist hoisting equipment and skill in handling longer pipes and larger refrigerant quantities.
Besides second industrial, Ra's Tannurah, our services reach An Naim, First Industrial and Al Fayha and the rest of Eastern.
Nearby areas for Split AC removal & install
Questions before you book in second industrial, Ra's Tannurah
How do you remove a split AC from an industrial building?
We drain the refrigerant from the large outdoor unit, carefully disconnect the copper pipes and electrical wiring, then lift the units using a hoist or specialist equipment from high roofs or industrial walls. Tell us where the AC is and how high when you call.
Do you install industrial ACs at new locations?
Yes. We install units on new walls and roofs, connect robust new piping, charge the correct refrigerant quantity and test the unit under full operation to ensure performance and safety.
Do you offer split AC removal & install in second industrial, Ra's Tannurah and around it?
Yes. We offer split AC removal & install in second industrial, Ra's Tannurah and in nearby areas such as An Naim and First Industrial, as part of our cover of every region of the Kingdom.
Should I switch the AC off before the team arrives?
Yes, switch the AC off well before we arrive so the unit stops cooling and the pressure in the pipes settles. Tell us when you contact us and we will guide you.
Where does the outdoor unit go in the new place?
The outdoor unit is usually fixed to an outside wall, a balcony edge or a roof; the position must be ventilated and able to bear the unit's weight. Tell us your options at the new place and we will advise on the best position.
What should I prepare before the team arrives to install?
Clear the wall where the indoor unit will go and move furniture away from it, decide in advance where the outdoor unit will be placed, and make sure both positions are accessible. The clearer your information, the smoother the installation.
Other services in second industrial, Ra's Tannurah




