
Window AC service in second industrial, Ra's Tannurah
When you move to another office in the Second Industrial district in Ra's Tannurah and need to relocate your window AC unit, Borooj Al Dammam removes it from its current opening and installs it in the new one.
The service in second industrial, Ra's Tannurah, in detail
In second industrial, Ra's Tannurah our service covers the tasks below, and you can ask for only the ones you need.

- Carrying the unit upright in a safe position
- Sealing the frame strips and reconnecting the cable
- Measuring the new opening before removal
- Fixing the bracket and fitting the unit into the opening
The steps of the service in second industrial, Ra's Tannurah
We measure and plan
Tell us the unit size and the new opening, and we confirm the opening fits the frame and the bracket suits it before we start.
We remove the unit
We disconnect the cable, remove the sealing strips and undo the bracket bolts, then pull the unit out upright because the evaporator is affected by tilting.
We carry and support
The unit is carried padded and in its correct position with corners protected, never on its side, so the evaporator refrigerant does not shift.
We fit and seal
We bolt the bracket into the new opening, set the unit on it at the correct level, and press the sealing strips around the frame so no air enters the gaps.
Why book window AC with Borooj Al Dammam
Our work for this service









Our customers on Google Maps
مشا الله شغلهم سريع ومرتب انصح بالتعامل معهم
Google Maps review · October 2026افضل شركه نقل اثاث
Google Maps review · July 2026شركه ممتازه جدا بصراحه الله يبارك في الشباب ما قصروا في شيء
Google Maps review · September 2026
Our service in second industrial, Ra's Tannurah
Your new workspace stays cooled without interruption.
In an industrial district where buildings sit at varying distances and openings differ in size, the unit may need frame adjustment or careful disconnection of pipes and wiring before moving. The technician separates the outer and inner units, drains the coolant safely, then dismantles the frames so they can travel through the narrow passages between buildings. Installation in the new location requires checking the opening and pipes, then refilling the system with coolant.
The Second Industrial district is in Ra's Tannurah in the Eastern Province, close to Dammam, so moving the unit from here is a short local journey.
On a short trip, a carefully placed AC unit needs no extra padding as long as the pipes are protected from bending.
If you are moving from or to second industrial, Ra's Tannurah, our service also covers An Naim, First Industrial and Al Fayha and the rest of Eastern.
Nearby areas for Window AC
Common questions about the service in second industrial, Ra's Tannurah
How long is the AC switched off during the move?
From removal to installation and system check, depending on the size of each opening and the distance between them. Tell us where your old and new offices are, and we work out the timing with you when you call.
Are the pipes and wires safe during transport?
We disconnect the pipes carefully and wrap them for protection, draining the coolant first to prevent spillage. On the short trip across the district, we secure them so they cannot bend or be damaged.
Do you serve the areas next to second industrial, Ra's Tannurah?
Yes. We serve An Naim, First Industrial and Al Fayha and other areas of Eastern, as well as second industrial, Ra's Tannurah itself.
What is the difference between a window unit and a split unit when moving?
A split unit is two separate parts joined by pipes and a cable, so moving it means disconnecting and re-running the pipes. A window unit is one piece in a frame: removal depends on getting it out of the opening intact and carrying it upright, and installation depends on the new opening being the right size and the bracket being firm.
What should I do before you arrive to remove the unit?
Switch the unit off and disconnect it from the electricity supply. Remove any curtain or screen in front of the opening from inside. Make sure the area below the outside of the opening is clear, because we need free space to support the unit as it comes out.
What do I tell you when I get in touch about window AC removal and installation?
Tell us the unit size if you know it, the type of the current and new openings, the floor at each location, and whether the new opening is ready or needs preparation. The more detail you give, the easier it is to arrange the job with you.
Other services in second industrial, Ra's Tannurah




