Borooj Al DammamFurniture Moving
عربي +966 57 328 4486
Living room with a sofa, armchair and wardrobe wrapped in film, cartons, and the open door onto a moving truck in the street

Split AC removal & install service in second industrial, Harmah

In the second industrial district of Riyadh, if you have a split AC that needs removal and installation, Borooj Al Dammam carries it out precisely, from draining the refrigerant to testing it at the new location.

Call now24 hours, 7 days
What it includes

The service in second industrial, Harmah, in detail

In second industrial, Harmah our service covers the tasks below, and you can ask for only the ones you need.

Split AC removal & install
  • Switching off the unit and sealing the pipes before removal
  • Running the pipes, cable and drain line
  • Lifting the indoor unit off its plate carefully
  • Fixing the bracket in the new place and fitting each unit in position
How we work

The steps of the service in second industrial, Harmah

  1. Seal the pipes, then remove

    Before any joint is opened the pipes are sealed to contain the refrigerant, then the indoor unit is lifted off its plate and the outdoor unit is unbolted and lowered safely from the wall or balcony.

  2. Confirm the new position

    You choose where the indoor and outdoor units will go, and we check that the wall will hold the bracket and that the pipe run is clear.

  3. Fix the bracket and run the pipes

    The indoor bracket is fixed to the wall first, the unit is mounted on it, and then the pipes, cable and drain line are run to the outdoor unit.

  4. Run the test

    The AC is switched on and we watch the cooling, the drain and the cable; if anything in the performance is off, we check the connections before leaving.

Why Borooj Al Dammam

What sets our way of working apart

Sealing pipes keeps the refrigerantOpening the pipes without sealing first lets the refrigerant escape and the unit needs recharging.
The drain prevents leaksA drain pipe fitted without the right slope sends water back to the indoor unit and it leaks into the wall.
The test run catches errorsA loose joint or a wiring error shows up in the test run before it becomes a costly fault.
The bracket is the foundationA bracket fixed to a poor wall causes vibration and weakens the mounting over time.
From our jobs

Our work for this service

The company’s white truck with a Borooj Al Dammam furniture moving sticker
A sitting room with sofas, chairs and tables wrapped in film, ready to move
A large hall with a glossy floor and big pieces of furniture wrapped in white
A living room after installation with a corner sofa, a table, a rug and side tables
Round side tables with metal bases set out in a hall
A seating corner with a sofa, an armchair, a glass table and side tables on a rug
Customer reviews

Our customers on Google Maps

About the area

Our service in second industrial, Harmah

The industrial zone contains warehouses, workshops and office buildings, and the AC may sit in a high or enclosed space. The crew removes both units, completely drains refrigerant and oil from the pipes, disconnects all wiring and connections, and labels each part clearly. After safe transport over the long distance from Dammam, they install the AC at the new site, connect the pipes, charge the system and test cooling and drainage thoroughly.

The second industrial district is in Riyadh far from Dammam, and moves from it require a long road trip across the Kingdom.

On long journeys, pipes and electrical connections are tested before final installation to ensure vibration and heat during transport did not harm them.

We serve second industrial, Harmah in Riyadh Region, and we also offer split AC removal & install in Al Muntazah, Al Basirah and Ar Rawdah.

Split AC removal & install: full service details

Nearby areas

Nearby areas for Split AC removal & install

FAQ

Common questions about the service in second industrial, Harmah

Do you install a split AC in the second industrial district after moving it from Dammam?

Yes. We remove the AC from your current location in Dammam or elsewhere, drain the refrigerant and oil, protect the pipes and wiring for safe transport, then install it in the second industrial district and test everything.

What if the AC is in a difficult spot in the industrial zone?

We account for it in planning. Tell us about the location, height and surrounding space, and we will use the right equipment and crew to carry out the work safely.

Do you offer split AC removal & install in second industrial, Harmah and around it?

Yes. We offer split AC removal & install in second industrial, Harmah and in nearby areas such as Al Muntazah and Al Basirah, as part of our cover of every region of the Kingdom.

What should I prepare before the team arrives to install?

Clear the wall where the indoor unit will go and move furniture away from it, decide in advance where the outdoor unit will be placed, and make sure both positions are accessible. The clearer your information, the smoother the installation.

Where does the outdoor unit go in the new place?

The outdoor unit is usually fixed to an outside wall, a balcony edge or a roof; the position must be ventilated and able to bear the unit's weight. Tell us your options at the new place and we will advise on the best position.

Do the old pipes need replacing when we reinstall?

The pipes are reused if they are in good condition and long enough for the new distance between the units. If they are short or damaged, this is spotted during removal. Call us or message on WhatsApp with the distance between the positions and we will discuss it with you.

Other services

Other services in second industrial, Harmah

All services
A tidy living room after the move with a sofa, cushions, a table, a rug and a large window onto a residential street

Book split AC removal & install in second industrial, Harmah

A call or a WhatsApp message is all it takes to start arranging split AC removal & install in second industrial, Harmah.

24 hours, 7 daysCall now
Call now